Wall Insulation

Installation of SuperQuilt for Timber Frame wall applications and additional insulation products should be in accordance with the certificate, YBS fixing instructions and current good building practice.

SuperQuilt is applied directly from the roll either vertically or horizontally depending on the wall height, pulled tight and stapled onto the timber studs at minimum 300mm centres.

SuperQuilt should be overlapped at each joint by approx. 50mm and stapled onto the battens, the joins should be sealed using 75mm YBS Foil Tape.

Perpendicular counter battens, recommended 25mm by 38mm are fixed to the wall. Battens must always be placed at the top and bottom of the wall and around the perimeter of doors and windows.

Key Features

  • Non degradable maintaining thermal performance and product integrity

  • Doesn't contain itchy floating fibers which can cause harm to humans

  • Flexible, Thin and Easy to Install.

  • Class 1 Surface spread of flame

  • High Performing Vapour Control Layer

  • Highly Reflective True Aluminum Outer Layers

  • Reduces Construction Depth

  • YBS SuperQuilt is suitable for new builds and renovations

  • Australian Building Certificate Beal IN1109

  • Designed to Insulate Roofs, Walls, Floors

Need help?

If you need any help selecting the correct product for your project or individual U-Value calculations just contact our Sales or Technical team and they will be only too happy to help.

Technical  0429331114

© 2019 by Superquilt Australia 

  • Black Facebook Icon
  • Black LinkedIn Icon